Product Image
Item Name- Model Price
Burn Pot Assembly This Burn Pot Assembly is used on all Breckwell Pellet Stoves This burn pot assembly is shown with the stainless steel insert. This may come with either a stainless steel insert or a cast...
A-S-BURNPOT-a1
$169.20... more info
A-COWL-23-BN P-23 Brushed Nickel Cowl This brushed nickel cowl provides a rich contrast to the metallic black finish of the P-23. This cowl fits both the P-23 freestander and insert models.
A-COWL-23-BN P-23 BRUSHED NICKEL
$137.00... more info
Air Switch C-E-201 This Air Switch is used on all Pellet and Multi-Fuel Stoves. This is a safety sensor that will measure the air pressure inside of the combustion chamber. It is valid for all models...
C-E-201-a1
$48.57... more info
A-M-BRICK23 P-23 BRICK PANELS These ceramic fiber brick panels provide an appealing, warm backdrop to your stove's fire glow.
A-M-BRICK23 P-23 BRICK PANELS
$158.40... more info
Auger Motor - 1 RPM C-E-017M This auger motor is used on some of the older Breckwell pellet stoves. The shaft of this auger motor has a beveled edge. It is used on older units that have an analog control panel...
C-E-017M-12-1011-a1
$154.00... more info
Auger Motor - 1 RPM C-E-017 This auger motor is used on all pellet stoves from 2003 to present. The shaft of this auger motor is round. P22 - All Units P23 - Serial Numbers 7166 to Present P23I - Serial...
C-E-017-12-1011
$160.00... more info
This auger motor is used on some older Breckwell pellet stoves and all of the Multi-Fuel or Corn stoves. P6000 - All Units Pellet Stoves This auger motor was used on most of the older pellet stoves with the...
C-E-010-12-1013-a1
$154.00... more info
Breckwell Combustion Blower All Models Except P28 3000 RPM, 1/70 HP, 115 v 60 Hz .6 amp The Combustion Blower is designed to pull combustion air through the stove and push it out through the vent piping. Don't...
A-E-027-10-1113-A1
$176.00... more info
Breckwell Control Panel Conversion Kit - Control boards are NOT returnable. Please make sure you order the correct control board for your stove! For older model Breckwell P22 and P23 pellet stoves without a...
A-E-057KIT-a1
$368.00... more info
Breckwell Control Panel Digital A-E-301 4 RPM This is the first generation of digital control panels for most Pellet stoves. 5 heat levels - Control boards are NOT returnable. Please make sure you order the...
A-E-301
$391.00... more info
Breckwell Convection Blower This Convection Blower is used on all Pellet and Multi-Fuel models except the P20, P28, and some older P2700's. This is the newest version of the A-E-033 convection blower and...
A-E-033KIT-A1
$294.50... more info
Breckwell Convection Fan Adapter Plate - A-MP-KIT Some of the older P2700 models (s/n 12439 and older) will need to order the adapter kit. 1993 and older stoves all models will also require this adaptor kit.
16-1020
$22.00... more info
Breckwell P22 and P23 Drop-In Ash Pan The drop-in ashpan is designed for all P-22 models and the P-23 insert model. It fits in the firebox, around the burnpot to catch the majority of ash. Simply lift it out...
A-P22-ASHDROP
$78.00... more info
Ignitor Element C-E-IGN The Igniter Element is used on all models of Pellet Stoves from 1998 to present. This IS NOT the Super Igniter. Super Igniter lasts 5 times longer and is Model Number 13-1116
C-E-IGN-PP3511
$68.00... more info
Burn Pot Insert - Stainless Steel This is just the stainless steel burn pot insert. It is not the entire assembly. The stainless steel insert and cast insert are interchangeable, though airflow is slightly...
A-S-INSERT
$108.96
Ceramic Log Set A-M-LOG Ceramic log set for all pellet stove models except P-2000, P-2000I, Big E, and Multi-Fuel corn stove.
A-M-LOG
$144.00... more info
COMBUSTION BLOWER GASKET A This gasket fits between the blower motor and the blower housing on the A-E-027 combustion blower. This blower is used on all current pellet stove models.
C-G-105-15-1015
$15.00... more info
Combustion Blower Gasket B This gasket fits between the blower housing and the stove. It is designed for the A-E-027 combustion blower used on all current model pellet stoves. Part Number C-G-101
C-G-101-15-1016
$26.00... more info
Control Panel, Digital - 1 RPM C-E-401 Includes board and face plate 5 heat levels Control boards are NOT returnable. Please make sure you order the correct control board for your stove! 30 Day Warranty This...
A-E-401
$285.00... more info
Convection Blower Room Air Blower A-E-033 This is an after-market version of the A-E-033 convection blower. It will fit on most pellet and multi-fuel stoves EXCEPT P20 and P28. Please check the measurements...
A-E-033-11-1210
$171.00... more info
Kit Includes: 8 Foot of Black Dense5/8 Inch Pellet Stove Door Gasket Gasket & Tube of High Temperature Stove Cememt Fits: Breckwell Austroflamm Pellet Stoves B10864K
15-1018
$24.00... more info
Glass Gasket Kit 1/4 in. x 10 ft 1/4 inch flat - self adhesive
15-1022-A1
$31.50... more info
Power Cord C-E-061 POWER CORD-DUAL MALE/FEMALE PLUGS USED ON 2003 PELLET STOVE MODELS TO PRESENT. USES THE C-E-071 THREE PRONG RECEPTACLE ON STOVE.
C-E-061
$15.00... more info
The High Temp Thermodisc is a safety switch located near the convection blower. This important safety device will monitor heat in the stove. It is used in all of our pellet stoves and the multi-fuel stoves as...
C-E-090-21-a1
$18.00... more info
THERMODISC - Low Limit or Proof of Fire with Adapter The Low-Limit or Proof of Fire Thermodisc is mounted on the Combustion Blower housing. Includes a mounting plate for models older than 2003. Replaces part...
C-E-090-22C-a1
$22.00... more info
Thermostat - RF Remote This remote thermostat can be used with all Breckwell Pellet, Gas, and Multi-Fuel stoves. The hand held remote can be placed anywhere in your home and the operation of the stove will be...
AG-RCN
$213.00
