Convection Fan Quadrafire 800

Convection Fan - Quadrafire 800

4 bolt holes on the mounting plate

Line A: 2 and 5 eighths inches
Line B: 3 and 3 quarters inches

A. The 80 cfm convection blower is located on the lower left side of the stove. The convection blower blows heated air through the heat exchange system into the room.
B. The blower is accessible by removing the left rear (facing the stove from the front) pedestal access door. You should inspect this blower at least once a year. If dust buildup has accumulated, clean by simply brushing and vacuuming dust off the blades.
C. This blower requires a 4 uf capacitor for operation.

BLOWERS
A. There are two blowers in this stove: an exhaust blower that evacuates the exhaust out of the firebox, and a convection blower that
delivers heat into the room. THESE BLOWERS REQUIRE NO LUBRICATION.
B. The exhaust blower is located on the right side of the stove. To inspect it, remove the right rear pedestal access door.
NOTE: There is no need for annual cleaning.
C. The convection blower is accessible by removing the left rear pedestal access door. The impeller on this blower should be cleaned
at least once a year. You can do this without removing the blower. Simply brush and vacuum the impeller area.